You need a wireless compressor kit like the Air Lift WirelessAIR Compressor System # AL58WQ in order to have a wireless function. A lot of standard compressor kits require a gauge to be installed inside the cab but if you let me know what compressor you have, I can let you know if there is a way to get it set up for wireless operation (granted we carry that brand of compressor).
Let me know what you have and I'll be more than happy to look into this further for you! view full answer...
Hi RJ,
With the information you provided the only compatible kit is going to be Firestone Ride-Rite Air Helper Springs # F2550 as long as our F-250's GVWR is over 8,500lbs. If you look in the door jamb or glove box there should be a sticker listing the GVWR of your F-250 so you can confirm. Air bag installations can vary in difficulty depending on how much space you have to work. With you having a Turnoverball hitch you'll likely have a little bit of a struggle getting everything in place... view full answer...
The Ride-Rite Red Label Extreme Duty Air Helper Springs # F56ZR is the kit specifically made by Firestone for your 2020 International CV series truck. These springs will provide up to 7,500lbs of support to your factory leaf springs. I have linked the installation instructions near the bottom of the page so you can see what all is involved for the installation.
The Firestone Air Command Heavy Duty Air Compressor # F2097 will allow you to adjust the air pressure in the air springs from the cab. view full answer...
Yes, they will! The Firestone Ride-Rite Air Helper Springs item # F2598 installs in place of the factory bump stops which means there will not be any issues using this kit on the 2" taller Power Wagon model of your 2022 Ram 2500.
I have linked an installation video below to help you get them set up.
Please note that these air bags do not work with gooseneck or 5th wheel hitch brackets. If you have an in bed hitch or plan on having one some day you'll want to install the Air Lift item... view full answer...
Adam, we don't have any air springs unfortunately for your 2006 Workhorse W42, but we do have the Timbren Rear Suspension Enhancement System # TGMRP30.
These are hollow rubber springs that sit above the rear axle, has up to 6,000 lbs of capacity, and requires no drilling for installation. view full answer...
Hey Mike,
The SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SSA22 just sits on top of the leaf spring stack so you would be able to also install the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88399. These air springs sit between the frame and bump out for the jounce bumper, with only a U-bolt wrapping around the block under the leaf spring stack so there should be no interference. view full answer...
Go To Results